COMBI TOOL AND MULTI-TALENT Cutting and spreading in one tool SC258 E2 is the optimized... more
COMBI TOOL AND MULTI-TALENT
Cutting and spreading in one tool SC258 E2 is the optimized successor model of the SC 250 E2
| Dimensions: | 874 x 215 x 281 mm |
| EN-Classification: | BK 32/320-F-15,8 |
| EN cutting class: | F |
| EN Cutting capacity: | 1G-2F-3F-4F-5G |
| Weight: | 14,9 kg |
| NFPA cutting classes: | A6, B6, C6, D7, E7 |
| Round steel up to: | 26 mm |
| Cutting force up to: | 280 kN |
| Protection class: | IP 54 |
| Series: | e2 |
| Spreading force 25 mm inward tip: | 32 kN |
| Spreading force up to: | 700 kN |
| Spreading distance: | 321 mm |
| Pulling force up to: | 34 kN |
| Pulling distance: | 330 mm |
SC258 E2 is the optimized successor model of the SC 250 E2 The rubber protective hose was... more
- SC258 E2 is the optimized successor model of the SC 250 E2
- The rubber protective hose was replaced by a multi-part safety cover
- A slimmer handle ensures effective handling and better balance
- The cutting class for round material according to Euronorm has improved from "F" to "G
- At 14.9 kg, the weight (without battery) is below the important 15 kg limit
- The chain set KSV 8/50 is replaced by a new chain set KSV 8/258 In the interest of increased cutting performance, the diameter of the pulling hole in the cutter arm had to be reduced from 16 mm (for KSV 8/50) to 12 mm (for KSV 8/258).
Technical Data of the product "SC 258 E2"
| Dimensions: | 874 x 215 x 281 mm |
| EN-Classification: | BK 32/320-F-15,8 |
| EN cutting class: | F |
| EN Cutting capacity: | 1G-2F-3F-4F-5G |
| Weight: | 14,9 kg |
| NFPA cutting classes: | A6, B6, C6, D7, E7 |
| Round steel up to: | 26 mm |
| Cutting force up to: | 280 kN |
| Protection class: | IP 54 |
| Series: | e2 |
| Spreading force 25 mm inward tip: | 32 kN |
| Spreading force up to: | 700 kN |
| Spreading distance: | 321 mm |
| Pulling force up to: | 34 kN |
| Pulling distance: | 330 mm |
Available downloads:
Customers also viewed
NEW PRODUCT
NEW PRODUCT
