Thank you very much!

The product was added to the comparison. You can add more products or start the comparison.

LUKAS
 
No results were found for the filter!
GC 650 E-2POWER GC 650 E-2POWER
The powerful power units of the 650 series supply all your devices from the LUKAS rerailing system with the necessary power for your project. The use of two- or also four-flow radial piston pumps is possible. Depending on your needs, up to four hydraulic cylinders can be supplied with the same flow rates. Maneuver synchronous extension and retraction of identical lift...
€1.00 *
Control Desk CU 2DV Control Desk CU 2DV
With the CU 2DV control table, you have everything under control from a safe distance. Move crashed vehicles precisely and easily from one point without entering the danger zone. Thanks to separate conveyor flows, you can approach each cylinder individually or in combination. One oil flow is available per cylinder. In this way, you control with absolute precision and...
€1.00 *
High-performance hand pump ZPH 3 / 8-2 D High-performance hand pump ZPH 3 / 8-2 D
The two-stage hand pumps from LUKAS remain capable of acting at all times in an emergency or in an explosive environment and can then quickly extend the telescopic cylinders in manual operation. The high-performance hand pumps are suitable for lifting or moving the load with one or two compact displacement units.
€1.00 *
PC 650-2POWER PC 650-2POWER
The powerful power units of the 650 series supply all your devices from the LUKAS rerailing system with the necessary power for your project. The use of two- or also four-flow radial piston pumps is possible. Depending on your needs, up to four hydraulic cylinders can be supplied with the same flow rates. Maneuver synchronous extension and retraction of identical lift...
€1.00 *
GC 650 E-4POWER GC 650 E-4POWER
The powerful power units of the 650 series supply all your devices from the LUKAS rerailing system with the necessary power for your project. The use of two- or also four-flow radial piston pumps is possible. Depending on your needs, up to four hydraulic cylinders can be supplied with the same flow rates. Maneuver synchronous extension and retraction of identical lift...
€1.00 *
PC 650-4POWER PC 650-4POWER
The powerful power units of the 650 series supply all your devices from the LUKAS rerailing system with the necessary power for your project. The use of two- or also four-flow radial piston pumps is possible. Depending on your needs, up to four hydraulic cylinders can be supplied with the same flow rates. Maneuver synchronous extension and retraction of identical lift...
€1.00 *
Control Desk CU 4DVV Control Desk CU 4DVV
With the CU 2DV or CU 4 DVV control table, you have everything under control from a safe distance. Move crashed vehicles precisely and easily from one point without entering the danger zone. Thanks to separate conveyor flows, you can approach each cylinder individually or in combination. One oil flow is available per cylinder. In this way, you control with absolute precision...
€1.00 *
DUO Traversing Unit DUO Traversing Unit
The LUKAS DUO Traversing Unit with integrated locking pin as counterholder allows you to operate the complete work process outside the danger zone without manual repositioning, even with heavy loads. The DUO Traversing Unit and the roller carriage are equipped with lateral guides to enable straight guidance on the bridge. During shifting, integrated sliding plates compensate...
€1.00 *
DUO Traversing Unit (Heavy Load) DUO Traversing Unit (Heavy Load)
The LUKAS DUO Traversing Unit (Heavy Loads) with integrated locking pin as counterholder allows you to operate the complete work process outside the danger zone without manual repositioning, even with heavy loads. The DUO TRaversing Unit (Heavy Loads) and the roller carriage are equipped with lateral guides to enable straight guidance on the bridge. During shifting,...
€1.00 *
Roller Carriage Roller Carriage
The roller carriage is part of the LUKAS DUO Traversing Unit. The roller carriage is equipped with lateral guides to enable straight guidance on the bridge. During shifting, integrated sliding plates compensate for the curved movement of the rail vehicles to be tracked in. To ensure optimum stability without tilting of the cylinders, LUKAS uses connecting rods and roller...
€1.00 *
Roller Carriage (Heavy Load) Roller Carriage (Heavy Load)
The roller carriage (heavy load) is part of the LUKAS DUO Traversing Unit. The roller carriage is equipped with lateral guides to enable straight guidance on the bridge. During shifting, integrated sliding plates compensate for the curved movement of the rail vehicles to be tracked in. To ensure optimum stability without canting of the cylinders, LUKAS uses connecting rods...
€1.00 *
Distance Bars Short Distance Bars Short
The LUKAS DUO Traversing Unit with integrated locking pin as counterholder enables you to operate the complete working process outside the danger zone without manual repositioning, even with heavy loads. An important part of the DUO Traversing Unit are the adjustable connecting rods. These are available in a short and a long version. To ensure optimum stability without...
€1.00 *
Distance Bars Long Distance Bars Long
The LUKAS DUO Traversing Unit with integrated locking pin as counterholder enables you to operate the complete working process outside the danger zone without manual repositioning, even with heavy loads. An important part of the DUO Traversing Unit are the adjustable connecting rods. These are available in a short and a long version. To ensure optimum stability without...
€1.00 *
Compact-traversing unit Compact-traversing unit
Compact-traversing unit For light rail vehicles. On a suitable surface, light rail vehicles can be traversed using the compact traversing unit, which allows you to rerail with absolute precision. This is thought through in detail to ensure that your rescue mission runs smoothly and safely. Use one or two units, depending on the weight of the accident vehicle. Permissible...
€1.00 *
HP 130 / 115 R HP 130 / 115 R
Single-stage lifting rams Compact & strong for short distances. Beside their enormous strength, our telescopic rams also feature thought-out design. High-strength, light alloy aluminum makes them resistant to corrosion and easy to maintain. Optimised surfaces The surfaces of the piston rods are hard-anodised to protect against damage; the piston guard plates are corrugated...
€1.00 *
HP 25 / T 185 R HP 25 / T 185 R
LIFTING CYLINDERS - COMPACT POWER GENERATORS FOR SHORT DISTANCES Thanks to their telescopic design, they can handle long lifting distances with a low overall height and can be used flexibly. They are made of a high-strength light alloy, corrosion-resistant, easy to maintain and particularly light. PERFECTLY MATCHED The stroke paths and lifting forces of the various cylinders...
€1.00 *
HP 25 / T 450 R HP 25 / T 450 R
LIFTING CYLINDERS - COMPACT POWER GENERATORS FOR SHORT DISTANCES Thanks to their telescopic design, they can handle long lifting distances with a low overall height and can be used flexibly. They are made of a high-strength light alloy, corrosion-resistant, easy to maintain and particularly light. PERFECTLY MATCHED The stroke paths and lifting forces of the various cylinders...
€1.00 *
HP 30 / T 500 R HP 30 / T 500 R
LIFTING CYLINDERS - COMPACT POWER GENERATORS FOR SHORT DISTANCES Thanks to their telescopic design, they can handle long lifting distances with a low overall height and can be used flexibly. They are made of a high-strength light alloy, corrosion-resistant, easy to maintain and particularly light. PERFECTLY MATCHED The stroke paths and lifting forces of the various cylinders...
€1.00 *
HP 50 / T 185 R HP 50 / T 185 R
LIFTING CYLINDERS - COMPACT POWER GENERATORS FOR SHORT DISTANCES Thanks to their telescopic design, they can handle long lifting distances with a low overall height and can be used flexibly. They are made of a high-strength light alloy, corrosion-resistant, easy to maintain and particularly light. PERFECTLY MATCHED The stroke paths and lifting forces of the various cylinders...
€1.00 *
HP 50 / T 400 R HP 50 / T 400 R
LIFTING CYLINDERS - COMPACT POWER GENERATORS FOR SHORT DISTANCES Thanks to their telescopic design, they can handle long lifting distances with a low overall height and can be used flexibly. They are made of a high-strength light alloy, corrosion-resistant, easy to maintain and particularly light. PERFECTLY MATCHED The stroke paths and lifting forces of the various cylinders...
€1.00 *
HP 65 / T 400 R HP 65 / T 400 R
LIFTING CYLINDERS - COMPACT POWER GENERATORS FOR SHORT DISTANCES Thanks to their telescopic design, they can handle long lifting distances with a low overall height and can be used flexibly. They are made of a high-strength light alloy, corrosion-resistant, easy to maintain and particularly light. PERFECTLY MATCHED The stroke paths and lifting forces of the various cylinders...
€1.00 *
HP 10 / T 280 R HP 10 / T 280 R
LIFTING CYLINDERS - COMPACT POWER GENERATORS FOR SHORT DISTANCES Thanks to their telescopic design, they can handle long lifting distances with a low overall height and can be used flexibly. They are made of a high-strength light alloy, corrosion-resistant, easy to maintain and particularly light. PERFECTLY MATCHED The stroke paths and lifting forces of the various cylinders...
€1.00 *
HP 16 / T 160 R HP 16 / T 160 R
Hubzylinder Kompakte Krafterzeuger für kurze Wege. Neben ihrer riesigen Kraft überzeugen unsere Hubzylinder mit ihrer durchdachten Bauweise. Sie sind aus einer hochfesten Leichtmetall-Legierung gefertigt, korrosionsbeständig und wartungsfreundlich. Optimierte Oberflächen Die Oberflächen der Kolbenstangen sind zum Schutz vor Schäden harteloxiert, die Kolbenschutzplatten sind...
€1.00 *
Stacking Set for HP 10 / 25 / 30 T Stacking Set for HP 10 / 25 / 30 T
The LUKAS stacking set extend the maximum lifting height.
€1.00 *
Stacking Set for HP 50 / T 185 R Stacking Set for HP 50 / T 185 R
The LUKAS stacking sets extend the maximum lifting height.
€1.00 *
Stacking Set for HP 50 / T 400 R Stacking Set for HP 50 / T 400 R
The LUKAS stacking sets extend the maximum lifting height.
€1.00 *
Stacking Set for HP 65 / T Stacking Set for HP 65 / T
The LUKAS stacking sets extend the maximum lifting height.
€1.00 *
Stacking Set for HP 130 / 115 R Stacking Set for HP 130 / 115 R
The LUKAS stacking sets extend the maximum lifting height.
€1.00 *
Base Plate for HP 10 / 25 / 30 / T... Base Plate for HP 10 / 25 / 30 / T...
The base plates increase the cylinder’s ground area and improve its overall stability, and are thus indispensable for all lifting work.
€1.00 *
Base Plate for HP 50 / T 185 R and HP 50 / T 400 R Base Plate for HP 50 / T 185 R and HP 50 / T 400 R
The base plates increase the cylinder’s ground area and improve its overall stability, and are thus indispensable for all lifting work.
€1.00 *
Base Plate for HP 65 / T 400 R Base Plate for HP 65 / T 400 R
The base plates increase the cylinder’s ground area and improve its overall stability, and are thus indispensable for all lifting work.
€1.00 *
Bridge 85 x .... Bridge 85 x ....
As soon as the derailed vehicle is lifted, the LUKAS rerailing bridge is used. Depending on the requirements, with one or two roller carriages and the DUO Traversing unit together, the vehicle can be shifted sideways and lowered again to the correct position. Available in the following lengths: 85 mm x 1100 mm 85 mm x 2200 mm 85 mm x 3300 mm
€1.00 *
Bridge 140 x ... Bridge 140 x ...
As soon as the derailed vehicle is lifted, the LUKAS rerailing bridge is used. Depending on the requirements, with one or two roller carriages and the DUO Traversing unit together, the vehicle can be shifted sideways and lowered again to the correct position. Available in the following lengths: 140 mm x 1100 mm 140 mm x 2200 mm 140 mm x 3300 mm
€1.00 *
Bridge 184 x ... Bridge 184 x ...
As soon as the derailed vehicle is lifted, the LUKAS rerailing bridge is used. Depending on the requirements, with one or two roller carriages and the DUO Traversing unit together, the vehicle can be shifted sideways and lowered again to the correct position. Available in the following lengths: 184 mm x 1100 mm 184 mm x 2200 mm 184 mm x 3300 mm 184 mm x 4400 mm
€1.00 *
HP 7 / 360R HP 7 / 360R
When it comes to vehicles with low ground clearance, LUKAS special jacks are valuable additions to your rerailing concept. The initial lifting of the vehicle is made easy thanks to the internal jacks. Manufacturers may install bayonet adapters in the vehicle floor depending upon the design and weight of the vehicle. In this case, the LUKAS internal jacks are inserted into...
€1.00 *
HP 10 / 250R HP 10 / 250R
When it comes to vehicles with low ground clearance, LUKAS special jacks are valuable additions to your rerailing concept. The initial lifting of the vehicle is made easy thanks to the internal jacks. Manufacturers may install bayonet adapters in the vehicle floor depending upon the design and weight of the vehicle. In this case, the LUKAS internal jacks are inserted into...
€1.00 *
HP 21 / 300R HP 21 / 300R
When it comes to vehicles with low ground clearance, LUKAS special jacks are valuable additions to your rerailing concept. The initial lifting of the vehicle is made easy thanks to the internal jacks. Manufacturers may install bayonet adapters in the vehicle floor depending upon the design and weight of the vehicle. In this case, the LUKAS internal jacks are inserted into...
€1.00 *
Tilting saddles 5° Ø 80 for HP 10 / HP 25 / HP 30 Tilting saddles 5° Ø 80 for HP 10 / HP 25 / HP 30
The tilt adapter plates protect the cylinders from damage and compensate for movements up to an angular ratio of 5°.
€1.00 *
Hose pair 10 Hose pair 10
Schläuche zum Verbinden von Aggregat und Steuertisch oder Hub- und DUO-Verschiebezylinder. Das Schlauchpaar ist mit Sicherheitskupplungen ausgestattet und in zwei Längen erhältlich.
€1.00 *
Hose pair 20 Hose pair 20
Hoses for connecting power unit and control desk or lifting and DUO trasversity cylinders. The hose pair is equipped with safety couplings and is available in two lengths.
€1.00 *
four pieces colour-marking-set four pieces colour-marking-set
colour-marking-set 1x red, 1x yellow, 1x blue, 1x grey
€1.00 *
Hose red Hose red
Connection of hand pump to Cylinder for AXP 100 (LFM 100 single-acting)
€1.00 *
HP 30 / T 700 R HP 30 / T 700 R
LIFTING CYLINDERS - COMPACT POWER GENERATORS FOR SHORT DISTANCES Thanks to their telescopic design, they can handle long lifting distances with a low overall height and can be used flexibly. They are made of a high-strength light alloy, corrosion-resistant, easy to maintain and particularly light. PERFECTLY MATCHED The stroke paths and lifting forces of the various cylinders...
€1.00 *
HP 30 / T 250 R HP 30 / T 250 R
LIFTING CYLINDERS - COMPACT POWER GENERATORS FOR SHORT DISTANCES Thanks to their telescopic design, they can handle long lifting distances with a low overall height and can be used flexibly. They are made of a high-strength light alloy, corrosion-resistant, easy to maintain and particularly light. PERFECTLY MATCHED The stroke paths and lifting forces of the various cylinders...
€1.00 *
DC 650-4POWER DC 650-4POWER
The powerful motor pumps of the 650 series supply all of your devices from the LUKAS rerailing system with the necessary power for your project. The use of two- or four-flow radial piston pumps is possible. Depending on requirements, up to four hydraulic cylinders can be supplied with the same flow rates. Maneuver synchronous extension and retraction of identical lifting...
€1.00 *
Dealer Network